Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 21440
Filename: ahcpd_0.53-3_arm_cortex-a9_vfpv3.ipk
Size: 22293
SHA256sum:2e1f8fc05ad9a13ca84dcb2ccff16439eb7a632e41ecd3598088a8877ec50e1b
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2020.0-1
Depends: libc, libnl-tiny, librt
License: GPL-2.0-only MIT
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 25354
Filename: alfred_2020.0-1_arm_cortex-a9_vfpv3.ipk
Size: 26595
SHA256sum:fa7612f4d13f98648221cdbac45185962d88cf4191a4ebafd94a45d386146dfc
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 3743
Filename: babel-pinger_0.1-1_arm_cortex-a9_vfpv3.ipk
Size: 4517
SHA256sum:838cca05d70cb7903de1848397ccf9ef933c37b65b38e2fb39a254651f7ef9fa
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.9.1-1
Depends: libc
License: MIT
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 54579
Filename: babeld_1.9.1-1_arm_cortex-a9_vfpv3.ipk
Size: 55646
SHA256sum:43d7b9776a7e2e24f1c602b68c7547f4f97f9b38490e7f701ca833102cabcde0
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is in the process of becoming an IETF Standard.

Package: batctl-default
Version: 2020.0-1
Depends: libc, libnl-tiny, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 41109
Filename: batctl-default_2020.0-1_arm_cortex-a9_vfpv3.ipk
Size: 42139
SHA256sum:b0e44d8c451751eb072357c6993692461fd2ff934d1e10f005206e4148e91554
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2020.0 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2020.0-1
Depends: libc, libnl-tiny, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 48325
Filename: batctl-full_2020.0-1_arm_cortex-a9_vfpv3.ipk
Size: 49309
SHA256sum:fd7516cc3220f53f2a28d41c513ea4d5075d78a80deb657a6cc23cfd729d3503
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2020.0 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2020.0-1
Depends: libc, libnl-tiny, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 15418
Filename: batctl-tiny_2020.0-1_arm_cortex-a9_vfpv3.ipk
Size: 16402
SHA256sum:25d51d0ea9c87199ee59036716b5e4d85adff50969f3054554e3bb74ed1525ab
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2020.0 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 39751
Filename: batmand_1440-1_arm_cortex-a9_vfpv3.ipk
Size: 40539
SHA256sum:bd93df9f3ded99a1feb38f7b620809fec66708e891c3d7ff315e7024a27e7f36
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird1-ipv4-uci
Version: 0.3-1
Depends: libc, bird1-ipv4, libuci20130104, uci
License: GPL-3.0+
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 6734
Filename: bird1-ipv4-uci_0.3-1_arm_cortex-a9_vfpv3.ipk
Size: 7715
SHA256sum:bc3e191dde762f98d39963a71ec9a0bce3bf1bb29af5a18413d3b906e54e4b49
Description:  bird1-ipv4 UCI integration module

Package: bird1-ipv4
Version: 1.6.8-1
Depends: libc, libpthread
Conflicts: bird4
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 197480
Filename: bird1-ipv4_1.6.8-1_arm_cortex-a9_vfpv3.ipk
Size: 198597
SHA256sum:2172e411a4e2c0dc72aa0818ab3452e0922414c0f656bd6e379a32f9111ec795
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1-ipv6-uci
Version: 0.3-1
Depends: libc, bird1-ipv6, libuci20130104, uci
License: GPL-3.0+
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 5897
Filename: bird1-ipv6-uci_0.3-1_arm_cortex-a9_vfpv3.ipk
Size: 6812
SHA256sum:ebcf6d336a19a9000062b463a15acb7b7073ec50f183d920f577fd67f096818e
Description:  bird1-ipv6 UCI integration module

Package: bird1-ipv6
Version: 1.6.8-1
Depends: libc, libpthread
Conflicts: bird6
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 226713
Filename: bird1-ipv6_1.6.8-1_arm_cortex-a9_vfpv3.ipk
Size: 227709
SHA256sum:84fce203e01a8bd7274a6b3fddb414cd8fa351131802d103ec28ddbe8f114719
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1c-ipv4
Version: 1.6.8-1
Depends: libc, libreadline8, libncurses6, bird1-ipv4
Conflicts: birdc4
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 8606
Filename: bird1c-ipv4_1.6.8-1_arm_cortex-a9_vfpv3.ipk
Size: 9793
SHA256sum:e5d1766efd8a72be3bba42ed46dd43c7e1fe951f21af602044c199c7dfdc74ee
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1c-ipv6
Version: 1.6.8-1
Depends: libc, libreadline8, libncurses6, bird1-ipv6
Conflicts: birdc6
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 8685
Filename: bird1c-ipv6_1.6.8-1_arm_cortex-a9_vfpv3.ipk
Size: 9880
SHA256sum:ee89d5652d93f9ec0fd4e63df9025bf7f40d8f3ddf68d60ba39c72acc6006841
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1cl-ipv4
Version: 1.6.8-1
Depends: libc, bird1-ipv4
Conflicts: birdcl4
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 7913
Filename: bird1cl-ipv4_1.6.8-1_arm_cortex-a9_vfpv3.ipk
Size: 9043
SHA256sum:51ee2a8220b862094e1d5a0cd07f103e7c378ba2cc350aa58b627ac2db9b2c6c
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird1cl-ipv6
Version: 1.6.8-1
Depends: libc, bird1-ipv6
Conflicts: birdcl6
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 7979
Filename: bird1cl-ipv6_1.6.8-1_arm_cortex-a9_vfpv3.ipk
Size: 9104
SHA256sum:efeb824089b0930ea4b3ef19eead3f693b1ba23df66b76249ed6ea92c06a5dfa
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird2
Version: 2.0.7-2
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 299686
Filename: bird2_2.0.7-2_arm_cortex-a9_vfpv3.ipk
Size: 300403
SHA256sum:771498c44a1fbbe48cc7b7d414336f7ae75edcc29529146ef0a3abefb2fcc60b
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.0.7-2
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 8824
Filename: bird2c_2.0.7-2_arm_cortex-a9_vfpv3.ipk
Size: 9863
SHA256sum:3b1fe6d282d086a9f067ffde9daaa4b22b7723e4c65f0f0e4478f798c18fa6bd
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.0.7-2
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 7888
Filename: bird2cl_2.0.7-2_arm_cortex-a9_vfpv3.ipk
Size: 8919
SHA256sum:9c86ff81e8b4320f00a8f433ea8beee5a5d6c553ebe40fb82e04ec4e2798eedc
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx6-json
Version: r2018020902-5
Depends: libc, bmx6, libjson-c4
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 6301
Filename: bmx6-json_r2018020902-5_arm_cortex-a9_vfpv3.ipk
Size: 7024
SHA256sum:39de36cecad9ec318656f8d68a15fa5ebb969855ab02bec31b923a7bf6ca0471
Description:  json plugin based on json-c

Package: bmx6-sms
Version: r2018020902-5
Depends: libc, bmx6
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 4852
Filename: bmx6-sms_r2018020902-5_arm_cortex-a9_vfpv3.ipk
Size: 5532
SHA256sum:573b42100cba16bb7900a102febff20d08458febf7c94c1812c9eea85037ad72
Description:  sms plugin

Package: bmx6-table
Version: r2018020902-5
Depends: libc, bmx6
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 8389
Filename: bmx6-table_r2018020902-5_arm_cortex-a9_vfpv3.ipk
Size: 9136
SHA256sum:4648943ddd0a204359b9699b43ea78ba44858cdea61cee71f021a2647253dcec
Description:  bmx6 table plugin to automatic announce routing-table routes via ip6ip tunnels

Package: bmx6-uci-config
Version: r2018020902-5
Depends: libc, bmx6, libuci20130104
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 8316
Filename: bmx6-uci-config_r2018020902-5_arm_cortex-a9_vfpv3.ipk
Size: 9127
SHA256sum:64ad38ddfe914942c58299d6112e7eada23df5ac7c9cbfd8a657c26d244967be
Description:  configuration plugin based on uci (recommended!)

Package: bmx6
Version: r2018020902-5
Depends: libc, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 139225
Filename: bmx6_r2018020902-5_arm_cortex-a9_vfpv3.ipk
Size: 139934
SHA256sum:15c1ec8c092ba430e41db22641e8d6cea063977f7641807fa2e9a6067bc34e97
Description:  BMX6 layer 3 routing daemon supporting IPv4, IPv6, and IPv4 over IPv6

Package: bmx7-iwinfo
Version: 7.1.1-2
Depends: libc, bmx7, libiwinfo20200105
License: GPL-2.0-or-later
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 3930
Filename: bmx7-iwinfo_7.1.1-2_arm_cortex-a9_vfpv3.ipk
Size: 4685
SHA256sum:3b9277ab97f959616aa7decd2aa274d2558b440b4ee73f0ee582bd49bdd09478
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-2
Depends: libc, bmx7, libjson-c4
License: GPL-2.0-or-later
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 7470
Filename: bmx7-json_7.1.1-2_arm_cortex-a9_vfpv3.ipk
Size: 8259
SHA256sum:9c5715f8b57722c48777fc943b6e6390d1c106b5d34f63f536b492c2523650b5
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-2
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 5325
Filename: bmx7-sms_7.1.1-2_arm_cortex-a9_vfpv3.ipk
Size: 6063
SHA256sum:cece1ddd9290ba067b3bfe926ddeceb4b0b0a1abf007914b41d8948bd997c7fc
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-2
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 9499
Filename: bmx7-table_7.1.1-2_arm_cortex-a9_vfpv3.ipk
Size: 10276
SHA256sum:37468278b50324700790e085df9264d8d5ea5a818125bb7b66919f254dfb119b
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-2
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 4983
Filename: bmx7-topology_7.1.1-2_arm_cortex-a9_vfpv3.ipk
Size: 5698
SHA256sum:926bb298c5ac98254b3d92938699fe721252222f8a08fce71aa45450c5f23831
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-2
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 25553
Filename: bmx7-tun_7.1.1-2_arm_cortex-a9_vfpv3.ipk
Size: 26240
SHA256sum:3f314ff4baa0e033e6737187cb03bb4531fda99c59beb877f4682ba8a56dd9c4
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-2
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 8025
Filename: bmx7-uci-config_7.1.1-2_arm_cortex-a9_vfpv3.ipk
Size: 8857
SHA256sum:8e22617b0e64107b198d02f9087497b42db1f3b71b690d81d1906e3bd5bd5fc8
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-2
Depends: libc, zlib, libmbedtls12, libiwinfo20200105
License: GPL-2.0-or-later
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 171118
Filename: bmx7_7.1.1-2_arm_cortex-a9_vfpv3.ipk
Size: 171825
SHA256sum:49c3d77297ef27d360fc7e9b3aa1cf8c4f01db35b4b4b297ac7436c38d2b4575
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v20.4-3
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 329436
Filename: cjdns-tests_v20.4-3_arm_cortex-a9_vfpv3.ipk
Size: 329617
SHA256sum:852498d8a3c34d827e0f35aa810797bed31586313fcfbf98e1b0deb2a6e45e2f
Description:  cjdns test cases

Package: cjdns
Version: v20.4-3
Depends: libc, kmod-tun, libnl-tiny, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 387860
Filename: cjdns_v20.4-3_arm_cortex-a9_vfpv3.ipk
Size: 388451
SHA256sum:50e647f07f1574c082cd8da50e8f1f300bf08441e1f7c1ea0ce9c243fd7906da
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 547
Filename: hnet-full-l2tp_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_cortex-a9_vfpv3.ipk
Size: 1395
SHA256sum:a1b448c5ef09a0ecc735701d1377216cf8cbd4002cdf013c3d4929ad019ed055
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 96
Filename: hnet-full-secure_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_cortex-a9_vfpv3.ipk
Size: 927
SHA256sum:986645515925ba7bbec34c6e79e5736f38cf91be128d22c9e0b77ad5546ee1e7
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 96
Filename: hnet-full_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_cortex-a9_vfpv3.ipk
Size: 910
SHA256sum:d4ef3683c60d197761269221cb138aefd716f15189aac05117144a851f8e8ded
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 92860
Filename: hnetd-nossl_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_cortex-a9_vfpv3.ipk
Size: 93956
SHA256sum:dfe4a3c5fa6e16bb12830f5d81ac5589f03a739e635f5d8c6b7ee5ba71061dfc
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl1.1
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 102540
Filename: hnetd-openssl_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_cortex-a9_vfpv3.ipk
Size: 103625
SHA256sum:b345118c0d9fb46701a7a5eb2ac786b0cb031a5874862e5c1b1e201f1cda6f64
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-bird1-ipv4
Version: 0.3-1
Depends: libc, bird1-ipv4-uci, luci-base
License: GPL-3.0+
Section: luci
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 7420
Filename: luci-app-bird1-ipv4_0.3-1_arm_cortex-a9_vfpv3.ipk
Size: 8200
SHA256sum:43d45f2273a74238cf190f408d9ac672e84c5f9e8c72a48770f29702073f9b52
Description:  bird4 application for LuCI

Package: luci-app-bird1-ipv6
Version: 0.3-1
Depends: libc, bird1-ipv6-uci, luci-base
License: GPL-3.0+
Section: luci
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 7465
Filename: luci-app-bird1-ipv6_0.3-1_arm_cortex-a9_vfpv3.ipk
Size: 8245
SHA256sum:dc99e8aff6fa0b60143a081c396a03a77c3cb6aced3c8ee8569f74fe668048f6
Description:  bird6 application for LuCI

Package: luci-app-bmx6
Version: 6
Depends: libc, luci-lib-json, luci-base, luci-lib-httpclient, bmx6, luci-lib-jquery-1-4, luci-lib-dracula
License: GPL-2.0+
Section: luci
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 30303
Filename: luci-app-bmx6_6_arm_cortex-a9_vfpv3.ipk
Size: 31106
SHA256sum:51e7d75f089b6e9c3923bc955a8bc328d008098bf1009ffb1c2ea88a8ee8cd42
Description:  bmx6 web application (status and configuration) for LuCi web interface

Package: luci-app-cjdns
Version: 1.3-7
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 5366
Filename: luci-app-cjdns_1.3-7_arm_cortex-a9_vfpv3.ipk
Size: 6277
SHA256sum:09f8a36438ed701de7a1e14f14765266aebe6efce1c4c37a2568d3b168af3a8b
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc
License: GPL-2.0
Section: luci
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 56780
Filename: luci-app-hnet_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_cortex-a9_vfpv3.ipk
Size: 57613
SHA256sum:ddf0ad436ce256d0a339ac3660e3ec4253b56e89ac3ba05a492d029009bb6ac6
Description:  HNCP Homenet configuration and visualization

Package: luci-lib-dracula
Version: 6
Depends: libc
License: GPL-2.0+
Section: luci
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 23285
Filename: luci-lib-dracula_6_arm_cortex-a9_vfpv3.ipk
Size: 23981
SHA256sum:c82c40d3743b2aabb82173c55d546bbf878a5d85cefb7e556f0d225d63c8f676
Description:  dracula graph javascript library

Package: luci-lib-jquery-1-4
Version: 6
Depends: libc
License: GPL-2.0+
Section: luci
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 24820
Filename: luci-lib-jquery-1-4_6_arm_cortex-a9_vfpv3.ipk
Size: 25535
SHA256sum:66e1161b006553f9b6913ee84461928aeddb0245bb02661893e1a5a642e23494
Description:  minified javascript jQuery 1.4 library

Package: mcproxy
Version: 2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-2
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0+
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 115970
Filename: mcproxy_2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-2_arm_cortex-a9_vfpv3.ipk
Size: 116970
SHA256sum:036ec31c2cef93d79d46fad47fa68737c12189225877bb64c3e2a2af1669d619
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: minimalist-pcproxy
Version: 2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-1
Depends: libc, libubox20191228
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 6040
Filename: minimalist-pcproxy_2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-1_arm_cortex-a9_vfpv3.ipk
Size: 7044
SHA256sum:9b6b23fcd358260d1d23900c6190435a4d3b85975deb33c215a74807f1e0a152
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: mrd6
Version: 2013-11-30-c805eb33255dbc0b6647d463c6c67d1c9d3105a0-2
Depends: libc, libstdcpp6
License: GPL-2.0+
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 256488
Filename: mrd6_2013-11-30-c805eb33255dbc0b6647d463c6c67d1c9d3105a0-2_arm_cortex-a9_vfpv3.ipk
Size: 257317
SHA256sum:f72b756f1bb880f086032756f2a20b57bf679f29174cc7c92c2609cd23b9166d
Description:  Multicast is becoming a major component in next generation networks, used 
 in several scenarios, from video broadcasting to multimedia conferencing. 
 In order to be implemented, new technology needs supporting hardware and 
 software across a set of devices and systems. MRD6 is an implementation of 
 a modular IPv6 Multicast Routing Framework for the Linux operating system 
 and provides MLDv2 (as well as MLDv1), PIM-SM and MBGP support.

Package: ndppd
Version: 0.2.5-1
Depends: libc, uclibcxx
License: GPL-3.0+
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 29898
Filename: ndppd_0.2.5-1_arm_cortex-a9_vfpv3.ipk
Size: 30871
SHA256sum:96883a3fd2e617c9ebbe9bdb13ba505a90069f821e16a1f03cd8530ab34917be
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 4.4.0-1
Depends: libc, libpthread, iptables-mod-ipopt, libmicrohttpd-no-ssl
Conflicts: nodogsplash2
License: GPL-2.0+
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 62735
Filename: nodogsplash_4.4.0-1_arm_cortex-a9_vfpv3.ipk
Size: 63693
SHA256sum:a15986df8d15645e60cbb263843d526c54adbaa69eb95e64986e4bc373eba835
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.
 It also incorporates an API that allows the creation of
 sophisticated authentication applications.

Package: ohybridproxy
Version: 2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1
Depends: libc, libubox20191228, mdnsd
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 11299
Filename: ohybridproxy_2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1_arm_cortex-a9_vfpv3.ipk
Size: 12148
SHA256sum:a36eeefbbeb81f5b60a179c00454d9e703ddae18b78b12fc82aa45e13807ca5e
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: oonf-dlep-proxy
Version: 0.14.1-1
Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 99518
Filename: oonf-dlep-proxy_0.14.1-1_arm_cortex-a9_vfpv3.ipk
Size: 100434
SHA256sum:a571cf0b74fb2de75f54ea38733306a2845e09796bd632140a7403872c955098
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 0.14.1-1
Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 95992
Filename: oonf-dlep-radio_0.14.1-1_arm_cortex-a9_vfpv3.ipk
Size: 96761
SHA256sum:b4dce29f170695fa803ad250ff65f8850baa2738cb40b0fe1b2d7d22bb9966ae
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 1385
Filename: oonf-init-scripts_0.9.1-r3_arm_cortex-a9_vfpv3.ipk
Size: 2104
SHA256sum:c802615c36b2ed67918a8beef0bdb3a5055ab8d08609fd711584a1280f1894db
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 0.14.1-1
Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 161266
Filename: oonf-olsrd2_0.14.1-1_arm_cortex-a9_vfpv3.ipk
Size: 162100
SHA256sum:001908d88f4e457313d40d09ae185877eed3cfd02fcafea7ad1636f36ecceee7
Description:  Build Olsrd V2 Routing Agent

Package: pimbd
Version: 2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-1
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 80978
Filename: pimbd_2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-1_arm_cortex-a9_vfpv3.ipk
Size: 81915
SHA256sum:7a8936eada4cb708c4b49ddd8a3da21a7162a59cc494af0b4afbc7c254ae280a
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be 
 installed and running in order for PIM to function.

Package: prince
Version: v0.4-1
Depends: libc, libjson-c4, libpthread
License: MIT
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 25379
Filename: prince_v0.4-1_arm_cortex-a9_vfpv3.ipk
Size: 26288
SHA256sum:581abdf140e7feb6a1883479738819329ce61a7227fdfa1d0cbb4c4fb7d805bf
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: quagga-bgpd
Version: 1.1.0-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 199289
Filename: quagga-bgpd_1.1.0-1_arm_cortex-a9_vfpv3.ipk
Size: 199577
SHA256sum:7211c61cfd4ab3ff0a0517814e54472c128f55bde60b4a866bfc7231d1382116
Description:  BGPv4, BGPv4+, BGPv4- routing engine

Package: quagga-isisd
Version: 1.1.0-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 91275
Filename: quagga-isisd_1.1.0-1_arm_cortex-a9_vfpv3.ipk
Size: 91864
SHA256sum:c55ca8e9ce9ee926d4d8a1dd90780a24f254f6e1a21c56093705ec88d32c1e58
Description:  IS-IS routing engine

Package: quagga-libospf
Version: 1.1.0-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 192459
Filename: quagga-libospf_1.1.0-1_arm_cortex-a9_vfpv3.ipk
Size: 191483
SHA256sum:83b03b8199b208af4f3c09a4f4cd124b093fbede806f8c0c12a849b24614adac
Description:  OSPF library

Package: quagga-libzebra
Version: 1.1.0-1
Depends: libc, quagga
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 130187
Filename: quagga-libzebra_1.1.0-1_arm_cortex-a9_vfpv3.ipk
Size: 129484
SHA256sum:8b8c295584cec0bf3c9c4f4a7b379b2aa33c455f3b7ad09c6d31e45c6858acfb
Description:  zebra library

Package: quagga-ospf6d
Version: 1.1.0-1
Depends: libc, quagga, quagga-libospf
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 88087
Filename: quagga-ospf6d_1.1.0-1_arm_cortex-a9_vfpv3.ipk
Size: 88810
SHA256sum:5446523d180a8ea17a79e3f69edc0809de6f5e8771fd0ac435a60e4d3b240fe2
Description:  OSPFv3 routing engine

Package: quagga-ospfd
Version: 1.1.0-1
Depends: libc, quagga, quagga-libospf
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 3596
Filename: quagga-ospfd_1.1.0-1_arm_cortex-a9_vfpv3.ipk
Size: 4363
SHA256sum:0115a5c52423b541b1c1dfeb5cb3da57465685f51eb1d96b77f6659ae31970b3
Description:  OSPFv2 routing engine

Package: quagga-ripd
Version: 1.1.0-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 36267
Filename: quagga-ripd_1.1.0-1_arm_cortex-a9_vfpv3.ipk
Size: 36637
SHA256sum:1d7074a3558038aae1c3797cfcaf9d5852b45e01caa217980eb5e204bf939e41
Description:  RIP routing engine

Package: quagga-ripngd
Version: 1.1.0-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 29701
Filename: quagga-ripngd_1.1.0-1_arm_cortex-a9_vfpv3.ipk
Size: 30419
SHA256sum:2516b5bbc5bc735b29bedd7fe6d99b9d865cd88dd3640b65639cb28818a746a9
Description:  RIPNG routing engine

Package: quagga-vtysh
Version: 1.1.0-1
Depends: libc, quagga, quagga-libzebra, libreadline8, libncurses6
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 118222
Filename: quagga-vtysh_1.1.0-1_arm_cortex-a9_vfpv3.ipk
Size: 118457
SHA256sum:0c4b174948e22812b66e493a28b759a06c567c7a3f82fcedbd23d4367b2adaf9
Description:  integrated shell for Quagga routing software

Package: quagga-watchquagga
Version: 1.1.0-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 11384
Filename: quagga-watchquagga_1.1.0-1_arm_cortex-a9_vfpv3.ipk
Size: 12151
SHA256sum:195648912176b13d6e119a42bde6188d451cbe810a622605e6087575683f6f13
Description:  Quagga watchdog

Package: quagga-zebra
Version: 1.1.0-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 89023
Filename: quagga-zebra_1.1.0-1_arm_cortex-a9_vfpv3.ipk
Size: 89338
SHA256sum:9c793fceeb8bfdabf620e58afeaf874ff5e88d0d0e31bdf39e11147bb2bb9ca4
Description:  Zebra daemon

Package: quagga
Version: 1.1.0-1
Depends: libc, librt
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 2383
Filename: quagga_1.1.0-1_arm_cortex-a9_vfpv3.ipk
Size: 3181
SHA256sum:611441a98b6d1e524c785fabc56b285b8e0b42979c7868e90b507034841cbdeb
Description:  A routing software package that provides TCP/IP based routing services
 with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
 OSPFv3, BGP-4, and BGP-4+

Package: vis
Version: 1440-2
Depends: libc, libpthread
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 10320
Filename: vis_1440-2_arm_cortex-a9_vfpv3.ipk
Size: 11113
SHA256sum:7f27add05b73d92f4583955e558b482c289ad9a5a49599884741f22ea795caa7
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1
Depends: libc, libubox20191228
License: GPL-2.0
Section: net
Architecture: arm_cortex-a9_vfpv3
Installed-Size: 9359
Filename: zonestitcher_2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1_arm_cortex-a9_vfpv3.ipk
Size: 10160
SHA256sum:ea74d0879854b93755b8c02ebaa448ae582975699beb996399dd95d03dea7b7a
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.