Applying ./patches/010-no-buildcxxflags.patch using plaintext: patching file src/Makefile.am autoreconf: export WARNINGS= autoreconf: Entering directory '.' autoreconf: configure.ac: not using Gettext autoreconf: running: /builder/shared-workdir/build/sdk/staging_dir/host/bin/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/host/share/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/hostpkg/share/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/share/aclocal -I m4 -I . --force autoreconf: configure.ac: tracing autoreconf: configure.ac: adding subdirectory libltdl to autoreconf autoreconf: Entering directory 'libltdl' autoreconf: configure.ac: not using Gettext autoreconf: running: /builder/shared-workdir/build/sdk/staging_dir/host/bin/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/host/share/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/hostpkg/share/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/share/aclocal -I m4 -I . --force -I m4 autoreconf: configure.ac: tracing autoreconf: running: /builder/shared-workdir/build/sdk/staging_dir/host/bin/libtoolize --install --force --ltdl OpenWrt-libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '../cfgaux'. OpenWrt-libtoolize: linking file '../cfgaux/compile' OpenWrt-libtoolize: linking file '../cfgaux/config.guess' OpenWrt-libtoolize: linking file '../cfgaux/config.sub' OpenWrt-libtoolize: linking file '../cfgaux/depcomp' OpenWrt-libtoolize: linking file '../cfgaux/install-sh' OpenWrt-libtoolize: linking file '../cfgaux/missing' OpenWrt-libtoolize: linking file '../cfgaux/ltmain.sh' OpenWrt-libtoolize: putting macros in 'm4'. OpenWrt-libtoolize: linking file 'm4/libtool.m4' OpenWrt-libtoolize: You should add the contents of 'm4/libtool.m4' to 'aclocal.m4'. OpenWrt-libtoolize: linking file 'm4/ltargz.m4' OpenWrt-libtoolize: linking file 'm4/ltdl.m4' OpenWrt-libtoolize: linking file 'm4/ltoptions.m4' OpenWrt-libtoolize: You should add the contents of 'm4/ltoptions.m4' to 'aclocal.m4'. OpenWrt-libtoolize: linking file 'm4/ltsugar.m4' OpenWrt-libtoolize: You should add the contents of 'm4/ltsugar.m4' to 'aclocal.m4'. OpenWrt-libtoolize: linking file 'm4/ltversion.m4' OpenWrt-libtoolize: linking file 'm4/lt~obsolete.m4' OpenWrt-libtoolize: You should add the contents of 'm4/lt~obsolete.m4' to 'aclocal.m4'. OpenWrt-libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, '.'. OpenWrt-libtoolize: linking file './COPYING.LIB' OpenWrt-libtoolize: creating file './Makefile.am' OpenWrt-libtoolize: linking file './README' OpenWrt-libtoolize: creating file './configure.ac' OpenWrt-libtoolize: creating file './aclocal.m4' OpenWrt-libtoolize: creating file './Makefile.in' OpenWrt-libtoolize: linking file './config-h.in' OpenWrt-libtoolize: creating file './configure' OpenWrt-libtoolize: linking file './libltdl/lt__alloc.h' OpenWrt-libtoolize: linking file './libltdl/lt__argz_.h' OpenWrt-libtoolize: linking file './libltdl/lt__dirent.h' OpenWrt-libtoolize: linking file './libltdl/lt__glibc.h' OpenWrt-libtoolize: linking file './libltdl/lt__private.h' OpenWrt-libtoolize: linking file './libltdl/lt__strl.h' OpenWrt-libtoolize: linking file './libltdl/lt_dlloader.h' OpenWrt-libtoolize: linking file './libltdl/lt_error.h' OpenWrt-libtoolize: linking file './libltdl/lt_system.h' OpenWrt-libtoolize: linking file './libltdl/slist.h' OpenWrt-libtoolize: linking file './loaders/dld_link.c' OpenWrt-libtoolize: linking file './loaders/dlopen.c' OpenWrt-libtoolize: linking file './loaders/dyld.c' OpenWrt-libtoolize: linking file './loaders/load_add_on.c' OpenWrt-libtoolize: linking file './loaders/loadlibrary.c' OpenWrt-libtoolize: linking file './loaders/preopen.c' OpenWrt-libtoolize: linking file './loaders/shl_load.c' OpenWrt-libtoolize: linking file './lt__alloc.c' OpenWrt-libtoolize: linking file './lt__argz.c' OpenWrt-libtoolize: linking file './lt__dirent.c' OpenWrt-libtoolize: linking file './lt__strl.c' OpenWrt-libtoolize: linking file './lt_dlloader.c' OpenWrt-libtoolize: linking file './lt_error.c' OpenWrt-libtoolize: linking file './ltdl.c' OpenWrt-libtoolize: linking file './ltdl.h' OpenWrt-libtoolize: linking file './slist.c' OpenWrt-libtoolize: Remember to add 'LTDL_INIT' to configure.ac. OpenWrt-libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, OpenWrt-libtoolize: and rerunning libtoolize and aclocal. autoreconf: configure.ac: not using Intltool autoreconf: configure.ac: not using Gtkdoc autoreconf: running: /builder/shared-workdir/build/sdk/staging_dir/host/bin/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/host/share/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/hostpkg/share/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/share/aclocal -I m4 -I . --force -I m4 autoreconf: running: /builder/shared-workdir/build/sdk/staging_dir/host/bin/autoconf --include=/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/host/share/aclocal --include=/builder/shared-workdir/build/sdk/staging_dir/hostpkg/share/aclocal --include=/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/share/aclocal --include=m4 --include=. --prepend-include=/builder/shared-workdir/build/sdk/staging_dir/host/share/aclocal --force autom4te: error: /builder/shared-workdir/build/staging_dir/host/share/autoconf/autoconf/trailer.m4: no such file or directory autoreconf: error: /builder/shared-workdir/build/sdk/staging_dir/host/bin/autoconf failed with exit status: 1 configure: loading site script /builder/shared-workdir/build/sdk/include/site/powerpc configure: creating cache config.cache checking for a BSD-compatible install... /builder/shared-workdir/build/sdk/staging_dir/host/bin/install -c checking whether build environment is sane... yes checking for powerpc-openwrt-linux-strip... powerpc-openwrt-linux-musl-strip checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether UID '1000' is supported by ustar format... yes checking whether GID '1000' is supported by ustar format... yes checking how to create a ustar tar archive... gnutar checking whether to enable maintainer-specific portions of Makefiles... no checking for powerpc-openwrt-linux-gcc... powerpc-openwrt-linux-musl-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether powerpc-openwrt-linux-musl-gcc accepts -g... yes checking for powerpc-openwrt-linux-musl-gcc option to enable C11 features... none needed checking whether powerpc-openwrt-linux-musl-gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of powerpc-openwrt-linux-musl-gcc... none checking whether the compiler supports GNU C++... yes checking whether powerpc-openwrt-linux-musl-g++ accepts -g... yes checking for powerpc-openwrt-linux-musl-g++ option to enable C++11 features... none needed checking dependency style of powerpc-openwrt-linux-musl-g++... none checking build system type... x86_64-pc-linux-gnu checking host system type... powerpc-openwrt-linux-gnu configure: CPU arch native optimization enabled: no checking simplified host os... linux (version ) checking whether powerpc-openwrt-linux-musl-g++ supports C++11 features by default... yes checking for powerpc-openwrt-linux-ranlib... powerpc-openwrt-linux-musl-gcc-ranlib checking how to run the C preprocessor... powerpc-openwrt-linux-musl-gcc -E checking whether ln -s works... yes checking for grep that handles long lines and -e... /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep checking for egrep... /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep -E checking for sh... /bin/sh checking for false... /bin/false checking for true... /bin/true checking for mv... /bin/mv checking for mkdir... /bin/mkdir checking for ln... /bin/ln checking for chmod... /bin/chmod checking for tr... /usr/bin/tr checking for rm... /bin/rm checking pkg-config is at least version 0.9.0... yes checking for perl... /builder/shared-workdir/build/sdk/staging_dir/host/bin/perl checking for pod2man... /usr/bin/pod2man checking for linuxdoc... /bin/false configure: strict error checking enabled: yes checking whether to use loadable modules... yes checking how to print strings... printf checking for a sed that does not truncate output... /builder/shared-workdir/build/sdk/staging_dir/host/bin/sed checking for fgrep... /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep -F checking for ld used by powerpc-openwrt-linux-musl-gcc... powerpc-openwrt-linux-musl-ld checking if the linker (powerpc-openwrt-linux-musl-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... powerpc-openwrt-linux-musl-gcc-nm checking the name lister (powerpc-openwrt-linux-musl-gcc-nm) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to powerpc-openwrt-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for powerpc-openwrt-linux-musl-ld option to reload object files... -r checking for powerpc-openwrt-linux-file... no checking for file... file configure: WARNING: using cross tools not prefixed with host triplet checking for powerpc-openwrt-linux-objdump... powerpc-openwrt-linux-musl-objdump checking how to recognize dependent libraries... pass_all checking for powerpc-openwrt-linux-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for powerpc-openwrt-linux-ar... powerpc-openwrt-linux-musl-gcc-ar checking for archiver @FILE support... @ checking for powerpc-openwrt-linux-strip... (cached) powerpc-openwrt-linux-musl-strip checking for powerpc-openwrt-linux-ranlib... (cached) powerpc-openwrt-linux-musl-gcc-ranlib checking command to parse powerpc-openwrt-linux-musl-gcc-nm output from powerpc-openwrt-linux-musl-gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for powerpc-openwrt-linux-mt... no checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if powerpc-openwrt-linux-musl-gcc supports -fno-rtti -fno-exceptions... no checking for powerpc-openwrt-linux-musl-gcc option to produce PIC... -fPIC -DPIC checking if powerpc-openwrt-linux-musl-gcc PIC flag -fPIC -DPIC works... yes checking if powerpc-openwrt-linux-musl-gcc static flag -static works... yes checking if powerpc-openwrt-linux-musl-gcc supports -c -o file.o... yes checking if powerpc-openwrt-linux-musl-gcc supports -c -o file.o... (cached) yes checking whether the powerpc-openwrt-linux-musl-gcc linker (powerpc-openwrt-linux-musl-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... yes checking whether a program can dlopen itself... cross checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking how to run the C++ preprocessor... powerpc-openwrt-linux-musl-g++ -E checking for ld used by powerpc-openwrt-linux-musl-g++... powerpc-openwrt-linux-musl-ld checking if the linker (powerpc-openwrt-linux-musl-ld) is GNU ld... yes checking whether the powerpc-openwrt-linux-musl-g++ linker (powerpc-openwrt-linux-musl-ld) supports shared libraries... yes checking for powerpc-openwrt-linux-musl-g++ option to produce PIC... -fPIC -DPIC checking if powerpc-openwrt-linux-musl-g++ PIC flag -fPIC -DPIC works... yes checking if powerpc-openwrt-linux-musl-g++ static flag -static works... yes checking if powerpc-openwrt-linux-musl-g++ supports -c -o file.o... yes checking if powerpc-openwrt-linux-musl-g++ supports -c -o file.o... (cached) yes checking whether the powerpc-openwrt-linux-musl-g++ linker (powerpc-openwrt-linux-musl-ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for powerpc-openwrt-linux-musl-g++ options needed to detect all undeclared functions... none needed checking what extension is used for runtime loadable modules... .so checking what variable specifies run-time module search path... LD_LIBRARY_PATH checking for the default library search path... /lib /usr/lib /usr/lib/x86_64-linux-gnu/libfakeroot /usr/local/lib /usr/local/lib/x86_64-linux-gnu /lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu /lib32 /usr/lib32 /libx32 /usr/libx32 checking for powerpc-openwrt-linux-musl-gcc options needed to detect all undeclared functions... none needed checking for library containing dlopen... none required checking for dlerror... yes checking for shl_load... (cached) no checking for shl_load in -ldld... (cached) no checking for dld_link in -ldld... no checking for _ prefix in compiled symbols... no checking whether deplibs are loaded by dlopen... yes checking for argz.h... no checking for error_t... no checking for argz_add... no checking for argz_append... no checking for argz_count... no checking for argz_create_sep... no checking for argz_insert... no checking for argz_next... no checking for argz_stringify... no checking whether libtool supports -dlopen/-dlpreopen... yes checking for ltdl.h... yes checking whether lt_dlinterface_register is declared... yes checking for lt_dladvise_preload in -lltdl... yes checking where to find libltdl headers... checking where to find libltdl library... -lltdl checking for unistd.h... yes checking for dl.h... no checking for sys/dl.h... no checking for dld.h... no checking for mach-o/dyld.h... no checking for dirent.h... yes checking for closedir... yes checking for opendir... yes checking for readdir... yes checking for strlcat... yes checking for strlcpy... yes checking for library containing dlopen... (cached) none required checking for dlerror... (cached) yes checking for shl_load... (cached) no checking for shl_load in -ldld... (cached) no checking for dld_link in -ldld... (cached) no checking what kind of compiler we're using... gcc checking for compiler variant... gcc checking whether compiler requires -Werror -Wno-deprecated-register... no configure: cbdata debugging enabled: no configure: xmalloc stats display: no configure: With dl checking whether linking without -latomic works... yes checking for library containing shm_open... none required checking for DiskIO modules to be enabled... AIO Blocking DiskDaemon DiskThreads IpcIo Mmapped checking for aio.h... yes checking for aio_read in -lrt... yes configure: Native POSIX AIO support detected. configure: Enabling AIO DiskIO module configure: Enabling Blocking DiskIO module configure: Enabling DiskDaemon DiskIO module checking for pthread_create in -lpthread... yes configure: Enabling DiskThreads DiskIO module configure: Enabling IpcIo DiskIO module configure: Enabling Mmapped DiskIO module configure: IO Modules built: AIO Blocking DiskDaemon DiskThreads IpcIo Mmapped checking for available StoreIO modules... aufs diskd rock ufs configure: Store modules built: aufs diskd rock ufs configure: Removal policies to build: lru configure: Delay pools enabled configure: Disabling ESI processor. libxml2 and libexpat not found. checking whether to support eCAP... no, explicitly configure: Web Cache Coordination Protocol enabled: yes configure: Web Cache Coordination V2 Protocol enabled: yes configure: Kill parent on shutdown hack enabled: yes configure: SNMP support enabled: no checking for windows.h... no checking for sys/sockio.h... no checking for sys/param.h... yes checking for net/if_arp.h... yes checking for net/route.h... yes checking for net/if_dl.h... no checking for sys/sysctl.h... no configure: EUI (MAC address) controls enabled: yes configure: HTCP support enabled: yes configure: Using Nettle cryptographic library: no checking for crypt in -lcrypt... yes checking for MD5Init in -lmd5... no configure: GnuTLS library support: no checking for openssl/asn1.h... yes checking for openssl/bio.h... yes checking for openssl/bn.h... yes checking for openssl/crypto.h... yes checking for openssl/decoder.h... yes checking for openssl/dh.h... yes checking for openssl/err.h... yes checking for openssl/evp.h... yes checking for openssl/lhash.h... yes checking for openssl/md5.h... yes checking for openssl/opensslv.h... yes checking for openssl/rsa.h... yes checking for openssl/ssl.h... yes checking for openssl/x509.h... yes checking for openssl/x509v3.h... yes checking for openssl/engine.h... yes checking for openssl/txt_db.h... yes checking for LIBOPENSSL... yes checking for OPENSSL_LH_strhash in -lcrypto... yes checking for EVP_PKEY_get0_RSA in -lcrypto... yes checking for BIO_meth_new in -lcrypto... yes checking for BIO_get_data in -lcrypto... yes checking for BIO_get_init in -lcrypto... yes checking for ASN1_STRING_get0_data in -lcrypto... yes checking for EVP_PKEY_up_ref in -lcrypto... yes checking for X509_STORE_CTX_get0_cert in -lcrypto... yes checking for X509_VERIFY_PARAM_get_depth in -lcrypto... yes checking for X509_STORE_CTX_get0_untrusted in -lcrypto... yes checking for X509_VERIFY_PARAM_set_auth_level in -lcrypto... yes checking for X509_up_ref in -lcrypto... yes checking for X509_chain_up_ref in -lcrypto... yes checking for X509_CRL_up_ref in -lcrypto... yes checking for DH_up_ref in -lcrypto... yes checking for X509_get0_signature in -lcrypto... yes checking for SSL_get0_param in -lcrypto... yes checking for OPENSSL_init_ssl in -lssl... yes checking for SSL_CIPHER_find in -lssl... yes checking for SSL_CTX_set_tmp_rsa_callback in -lssl... no checking for SSL_SESSION_get_id in -lssl... yes checking for TLS_method in -lssl... yes checking for TLS_client_method in -lssl... yes checking for TLS_server_method in -lssl... yes checking for SSL_CTX_get0_certificate in -lssl... yes checking whether SSL_CTX_new and similar openSSL API functions require 'const SSL_METHOD *'"... yes checking whether SSL_get_new_ex_index() dup callback accepts 'const CRYPTO_EX_DATA *'"... no checking whether SSL_CTX_sess_set_get_cb() callback accepts a const ID argument"... yes checking "whether X509_get0_signature() accepts const parameters"... yes checking whether the TXT_DB use OPENSSL_PSTRING data member... yes checking whether the squid workaround for buggy versions of sk_OPENSSL_PSTRING_value should used... no checking whether the workaround for OpenSSL IMPLEMENT_LHASH_ macros should used... yes checking whether hello message can be overwritten in SSL struct... no configure: OpenSSL library support: yes -L/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/lib -L/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/lib -lssl -lcrypto checking for LIB_KRB5... no configure: Try to find Kerberos libraries in given path checking for main in -lresolv... yes checking for main in -lcrypt... yes checking for main in -lroken... no configure: WARNING: library 'roken' is required for Heimdal Kerberos checking for main in -lheimbase... no configure: WARNING: library 'heimbase' may be required for Heimdal Kerberos checking for main in -lwind... no configure: WARNING: library 'wind' may be required for Heimdal Kerberos checking for main in -lcrypto... yes checking for main in -lcom_err... yes checking for main in -lhx509... no configure: WARNING: library 'hx509' may be required for Heimdal Kerberos checking for main in -lasn1... no configure: WARNING: library 'asn1' is required for Heimdal Kerberos checking for main in -lkrb5... yes checking for main in -lheimntlm... no configure: WARNING: library 'heimntlm' may be required for Heimdal Kerberos checking for main in -lgssapi... no configure: WARNING: library 'gssapi' is required for Heimdal Kerberos configure: WARNING: Heimdal Kerberos library not found checking for LIB_KRB5... no configure: Try to find Kerberos libraries in given path checking for main in -lgss... no configure: WARNING: library 'com_err' is required for GNU Kerberos configure: WARNING: GNU GSS Kerberos library not found configure: Kerberos library support: no checking for ldap_init in -lldap... no checking for ber_init in -llber... no checking for ldap_init in -lldap60... no checking for prldap_init in -lprldap60... no checking for ldapssl_init in -lssldap60... no checking for ldap.h... no checking for lber.h... no checking for mozldap/ldap.h... no checking for LDAP_OPT_DEBUG_LEVEL... no checking for working ldap... cross-compiler cant tell checking for OpenLDAP... cross-compiler cant tell checking for Sun LDAP SDK... cross-compiler cant tell checking for Mozilla LDAP SDK... cross-compiler cant tell checking for LDAP_REBINDPROC_CALLBACK... no checking for LDAP_REBIND_PROC... no checking for LDAP_REBIND_FUNCTION... no checking for LDAP_SCOPE_DEFAULT... no checking for struct ldap_url_desc.lud_scheme... no checking for ldapssl_client_init in -lldap... no checking for ldap_url_desc2str in -lldap... no checking for ldap_url_parse in -lldap... no checking for ldap_start_tls_s in -lldap... no checking for SYSTEMD... no checking for SYSTEMD... no checking for systemd/sd-daemon.h... no configure: systemd library support: no configure: Forw/Via database enabled: no configure: Cache Digests enabled: yes configure: enabling select syscall for net I/O: auto configure: enabling poll syscall for net I/O: auto checking for sys/event.h... no checking for kqueue... no configure: enabling kqueue for net I/O: no configure: enabling epoll syscall for net I/O: yes checking for library containing epoll_ctl... none required checking for sys/epoll.h... yes checking if epoll works... configure: enabling /dev/poll for net I/O: auto checking for ioctl... yes checking for write... yes checking for sys/devpoll.h... no configure: HTTP violations support enabled: yes configure: FreeBSD IPFW-based transparent proxying enabled: no configure: IPF-based transparent proxying requested: no configure: PF-based transparent proxying requested: no configure: NAT lookups via /dev/pf: no configure: Linux Netfilter support requested: yes configure: Linux Netfilter Conntrack support requested: no checking size of long... (cached) 4 configure: Leak Finder enabled: no configure: Support for X-Forwarded-For enabled: yes configure: Support for Ident lookups enabled: no configure: Default hosts file set to: /etc/hosts configure: Authentication support enabled: yes configure: Basic auth helpers to be built: configure: Digest auth helpers to be built: configure: Negotiate auth helpers to be built: configure: NTLM auth helpers to be built: configure: Log daemon helpers to be built: DB file configure: External acl helpers to be built: configure: URL rewrite helper candidates: LFS fake configure: URL rewrite helpers to be built: LFS fake configure: Security certificate validator helper candidates: fake configure: Security certificate validator helpers to be built: fake configure: Security certificate generator helper candidates: file configure: Security certificate generator helpers to be built: file configure: Store-ID rewrite helper candidates: file configure: Store-ID rewrite helpers to be built: file configure: Valgrind debug support enabled: no configure: MS Windows service mode enabled: no configure: unlinkd enabled: no configure: Automatically print stack trace on fatal errors: no configure: CPU profiling enabled: no configure: X-Accelerator-Vary support enabled: yes checking for LIBCPPUNIT... no configure: WARNING: cppunit does not appear to be installed. Squid does not require this, but code testing with 'make check' will fail. checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for egrep... (cached) /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep -E checking for arpa/inet.h... yes checking for arpa/nameser.h... yes checking for assert.h... yes checking for bstring.h... no checking for crypt.h... yes checking for ctype.h... yes checking for direct.h... no checking for errno.h... yes checking for execinfo.h... no checking for fcntl.h... yes checking for fnmatch.h... yes checking for getopt.h... yes checking for glob.h... yes checking for gnumalloc.h... no checking for grp.h... yes checking for ipl.h... no checking for lber.h... (cached) no checking for ldap.h... (cached) no checking for libc.h... no checking for limits.h... yes checking for linux/posix_types.h... yes checking for linux/types.h... yes checking for malloc.h... yes checking for math.h... yes checking for memory.h... yes checking for mount.h... no checking for netdb.h... yes checking for netinet/in.h... yes checking for netinet/in_systm.h... yes checking for netinet/tcp.h... yes checking for paths.h... yes checking for poll.h... yes checking for pwd.h... yes checking for regex.h... yes checking for sched.h... yes checking for siginfo.h... no checking for signal.h... yes checking for stdarg.h... yes checking for stddef.h... yes checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for strings.h... yes checking for sys/bitypes.h... no checking for sys/file.h... yes checking for sys/ioctl.h... yes checking for sys/ipc.cc... no checking for sys/param.h... (cached) yes checking for sys/prctl.h... yes checking for sys/md5.h... no checking for sys/mman.h... yes checking for sys/msg.h... yes checking for sys/resource.h... yes checking for sys/select.h... yes checking for sys/shm.h... yes checking for sys/socket.h... yes checking for sys/stat.h... yes checking for syscall.h... yes checking for sys/syscall.h... yes checking for sys/time.h... yes checking for sys/types.h... yes checking for sys/uio.h... yes checking for sys/un.h... yes checking for sys/vfs.h... yes checking for sys/wait.h... yes checking for syslog.h... yes checking for time.h... yes checking for unistd.h... (cached) yes checking for utime.h... yes checking for varargs.h... no checking for byteswap.h... yes checking for glib.h... no checking for stdint.h... yes checking for inttypes.h... yes checking for wchar.h... yes checking for linux/netfilter_ipv4.h... (cached) yes checking for linux/netfilter_ipv6/ip6_tables.h... yes checking for net/if.h... yes checking for netinet/if_ether.h... yes checking for netinet/icmp6.h... yes checking for netinet/in.h... (cached) yes checking for netinet/ip.h... yes checking for netinet/ip6.h... yes checking for netinet/ip_icmp.h... yes checking for netinet/ipl.h... no checking for net/pf/pfvar.h... no checking for net/pfvar.h... no checking for sys/mount.h... yes checking for resolv.h... yes checking for an ANSI C-conforming const... yes checking whether byte ordering is bigendian... (cached) yes checking whether struct tm is in sys/time.h or time.h... time.h checking for struct tm.tm_gmtoff... yes checking for struct rusage... yes checking for struct iphdr.ip_hl... yes checking size of void *... (cached) 4 checking for int8_t... yes checking for uint8_t... yes checking for int16_t... yes checking for uint16_t... yes checking for int32_t... yes checking for uint32_t... yes checking for int64_t... yes checking for uint64_t... yes checking for pid_t... yes checking for size_t... yes checking for ssize_t... yes checking for off_t... yes checking for uid_t in sys/types.h... yes checking for bool... yes checking size of int64_t... (cached) 8 checking size of long... (cached) 4 checking size of size_t... (cached) 4 checking size of off_t... (cached) 8 checking size of size_t... (cached) 4 checking whether nullptr is supported... yes checking whether nullptr_t is supported... no checking whether std::unique_ptr is supported... yes checking for tr1/random... yes checking whether std::uniform_int_distribution is supported... yes checking whether std::uniform_real_distribution is supported... yes checking whether compiler supports std::underlying_type... yes checking for pad128_t... no checking for upad128_t... no checking for mode_t... yes checking for fd_mask... yes checking for socklen_t... yes checking for mtyp_t... no checking for cpu_set_t... yes checking for compiler %zu support... yes checking for working alloca.h... yes checking for alloca... yes configure: libcap support enabled: no configure: libcap2 headers are ok: no checking for library containing gethostbyname... none required checking for library containing res_init... none required checking for library containing __res_search... no checking for library containing bind... none required checking for library containing opcom_stack_trace... no checking for library containing strlcpy... none required checking for library containing yp_match... no checking for unix domain sockets... yes checking for malloc in -lgnumalloc... no checking for main in -lmalloc... no checking for library containing rint... none required checking for library containing log... none required configure: forcing default of 2048 filedescriptors (user-forced) checking Default FD_SETSIZE value... 256 checking for getrlimit... yes checking for setrlimit... yes checking Maximum number of filedescriptors we can open... configure: Default number of filedescriptors: 2048 checking whether to enable IPv6... yes checking for sin6_len field in struct sockaddr_in6... no checking for ss_len field in struct sockaddr_storage... no checking for sin_len field in struct sockaddr_in... no checking for dlopen in -ldl... yes checking for backtrace_symbols_fd... no checking for bcopy... (cached) yes checking for eui64_aton... no checking for fchmod... (cached) yes checking for getdtablesize... yes checking for getpagesize... yes checking for getpass... yes checking for getrusage... yes checking for getspnam... yes checking for gettimeofday... (cached) yes checking for glob... yes checking for mallocblksize... no checking for mallopt... no checking for memcpy... yes checking for memmove... yes checking for memrchr... yes checking for memset... yes checking for mkstemp... yes checking for mktime... yes checking for mstats... no checking for poll... yes checking for prctl... yes checking for pthread_attr_setschedparam... yes checking for pthread_attr_setscope... yes checking for pthread_setschedparam... yes checking for pthread_sigmask... yes checking for putenv... yes checking for regcomp... yes checking for regexec... yes checking for regfree... yes checking for res_init... yes checking for __res_init... no checking for rint... yes checking for sched_getaffinity... yes checking for sched_setaffinity... yes checking for select... yes checking for seteuid... yes checking for setgroups... yes checking for setpgrp... yes checking for setsid... yes checking for sigaction... yes checking for snprintf... yes checking for socketpair... yes checking for sysconf... yes checking for syslog... yes checking for timegm... yes checking for vsnprintf... (cached) yes checking for initgroups... yes checking for psignal... (cached) yes checking for strerror... (cached) yes checking for strtoll... yes checking for tempnam... yes checking whether getaddrinfo is declared... yes checking whether getnameinfo is declared... yes checking whether inet_ntop is declared... yes checking whether inet_pton is declared... yes checking whether InetNtopA is declared... no checking whether InetPtonA is declared... no configure: choosing user-specified net I/O API epoll configure: Using epoll for the IO loop. checking if setresuid is actually implemented... checking for mswsock.h... no checking for constant CMSG_SPACE... yes checking for struct cmsghdr... yes checking for struct iovec... yes checking for struct msghdr... yes checking for struct sockaddr_un... yes checking if strnstr is well implemented... configure: IPF-based transparent proxying enabled: no configure: Support for Netfilter-based interception proxy requested: yes configure: WARNING: Missing needed capabilities (libcap 2.09+) for TPROXY configure: WARNING: Linux Transparent Proxy (version 4+) support WILL NOT be enabled configure: WARNING: Reduced support to NAT Interception Proxy configure: Linux Netfilter Conntrack support enabled: no configure: ZPH QOS enabled: yes configure: QOS netfilter mark preservation enabled: no checking for regexec in -lregex... no checking if the system-supplied regex lib actually works... yes checking if GNUregex needs to be compiled... no checking Default UDP send buffer size... 16384 checking Default UDP receive buffer size... 16384 checking Default TCP send buffer size... 16384 checking Default TCP receive buffer size... 16384 checking whether recv takes a pointer to void or char as second argument... char* char checking if sys_errlist is already defined... yes checking for system-provided MAXPATHLEN... yes checking for libresolv _dns_ttl_ hack... no checking for _res_ext.nsaddr_list... no checking for _res._u._ext.nsaddrs... no checking for _res.nsaddr_list... yes checking for _res.ns_list... no checking for sys/statvfs.h... yes checking for working statvfs() interface... yes configure: Multi-Language support enabled: no configure: BUILD LIBRARIES: configure: BUILD EXTRA LIBRARIES: -ldl configure: BUILD OBJECTS: configure: BUILD EXTRA OBJECTS: configure: BUILD C FLAGS: -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error configure: BUILD EXTRA C FLAGS: -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT configure: BUILD C++ FLAGS: -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error configure: BUILD EXTRA C++ FLAGS: -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT configure: BUILD Tools C++ FLAGS: -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error configure: updating cache config.cache checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating compat/Makefile config.status: creating contrib/Makefile config.status: creating doc/Makefile config.status: creating doc/manuals/Makefile config.status: creating doc/release-notes/Makefile config.status: creating errors/Makefile config.status: creating icons/Makefile config.status: creating lib/Makefile config.status: creating lib/libTrie/Makefile config.status: creating lib/libTrie/test/Makefile config.status: creating lib/ntlmauth/Makefile config.status: creating lib/profiler/Makefile config.status: creating lib/rfcnb/Makefile config.status: creating lib/smblib/Makefile config.status: creating lib/snmplib/Makefile config.status: creating scripts/Makefile config.status: creating src/Makefile config.status: creating src/acl/Makefile config.status: creating src/acl/external/Makefile config.status: creating src/acl/external/AD_group/Makefile config.status: creating src/acl/external/delayer/Makefile config.status: creating src/acl/external/eDirectory_userip/Makefile config.status: creating src/acl/external/file_userip/Makefile config.status: creating src/acl/external/kerberos_ldap_group/Makefile config.status: creating src/acl/external/kerberos_sid_group/Makefile config.status: creating src/acl/external/LDAP_group/Makefile config.status: creating src/acl/external/LM_group/Makefile config.status: creating src/acl/external/session/Makefile config.status: creating src/acl/external/SQL_session/Makefile config.status: creating src/acl/external/unix_group/Makefile config.status: creating src/acl/external/wbinfo_group/Makefile config.status: creating src/acl/external/time_quota/Makefile config.status: creating src/adaptation/Makefile config.status: creating src/adaptation/icap/Makefile config.status: creating src/adaptation/ecap/Makefile config.status: creating src/anyp/Makefile config.status: creating src/auth/Makefile config.status: creating src/auth/basic/Makefile config.status: creating src/auth/basic/DB/Makefile config.status: creating src/auth/basic/fake/Makefile config.status: creating src/auth/basic/getpwnam/Makefile config.status: creating src/auth/basic/LDAP/Makefile config.status: creating src/auth/basic/NCSA/Makefile config.status: creating src/auth/basic/NIS/Makefile config.status: creating src/auth/basic/PAM/Makefile config.status: creating src/auth/basic/POP3/Makefile config.status: creating src/auth/basic/RADIUS/Makefile config.status: creating src/auth/basic/SASL/Makefile config.status: creating src/auth/basic/SMB/Makefile config.status: creating src/auth/basic/SMB_LM/Makefile config.status: creating src/auth/basic/SSPI/Makefile config.status: creating src/auth/digest/Makefile config.status: creating src/auth/digest/eDirectory/Makefile config.status: creating src/auth/digest/file/Makefile config.status: creating src/auth/digest/LDAP/Makefile config.status: creating src/auth/negotiate/Makefile config.status: creating src/auth/negotiate/kerberos/Makefile config.status: creating src/auth/negotiate/SSPI/Makefile config.status: creating src/auth/negotiate/wrapper/Makefile config.status: creating src/auth/ntlm/Makefile config.status: creating src/auth/ntlm/fake/Makefile config.status: creating src/auth/ntlm/SMB_LM/Makefile config.status: creating src/auth/ntlm/SSPI/Makefile config.status: creating src/base/Makefile config.status: creating src/clients/Makefile config.status: creating src/comm/Makefile config.status: creating src/dns/Makefile config.status: creating src/DiskIO/Makefile config.status: creating src/DiskIO/AIO/Makefile config.status: creating src/DiskIO/Blocking/Makefile config.status: creating src/DiskIO/DiskDaemon/Makefile config.status: creating src/DiskIO/DiskThreads/Makefile config.status: creating src/DiskIO/IpcIo/Makefile config.status: creating src/DiskIO/Mmapped/Makefile config.status: creating src/error/Makefile config.status: creating src/esi/Makefile config.status: creating src/eui/Makefile config.status: creating src/format/Makefile config.status: creating src/fs/Makefile config.status: creating src/ftp/Makefile config.status: creating src/helper/Makefile config.status: creating src/http/Makefile config.status: creating src/http/one/Makefile config.status: creating src/http/url_rewriters/Makefile config.status: creating src/http/url_rewriters/fake/Makefile config.status: creating src/http/url_rewriters/LFS/Makefile config.status: creating src/icmp/Makefile config.status: creating src/ident/Makefile config.status: creating src/ip/Makefile config.status: creating src/ipc/Makefile config.status: creating src/log/Makefile config.status: creating src/log/DB/Makefile config.status: creating src/log/file/Makefile config.status: creating src/mem/Makefile config.status: creating src/mgr/Makefile config.status: creating src/parser/Makefile config.status: creating src/proxyp/Makefile config.status: creating src/repl/Makefile config.status: creating src/sbuf/Makefile config.status: creating src/security/Makefile config.status: creating src/security/cert_generators/Makefile config.status: creating src/security/cert_generators/file/Makefile config.status: creating src/security/cert_validators/Makefile config.status: creating src/security/cert_validators/fake/Makefile config.status: creating src/servers/Makefile config.status: creating src/snmp/Makefile config.status: creating src/ssl/Makefile config.status: creating src/store/Makefile config.status: creating src/store/id_rewriters/Makefile config.status: creating src/store/id_rewriters/file/Makefile config.status: creating test-suite/Makefile config.status: creating tools/Makefile config.status: creating tools/apparmor/Makefile config.status: creating tools/helper-mux/Makefile config.status: creating tools/purge/Makefile config.status: creating tools/squidclient/Makefile config.status: creating tools/systemd/Makefile config.status: creating tools/sysvinit/Makefile config.status: creating include/autoconf.h config.status: executing depfiles commands config.status: executing libtool commands === configuring in libltdl (/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7/libltdl) configure: running /bin/bash ./configure --disable-option-checking '--prefix=/usr' '--target=powerpc-openwrt-linux' '--host=powerpc-openwrt-linux' '--build=x86_64-pc-linux-gnu' '--disable-dependency-tracking' '--program-prefix=' '--program-suffix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--libexecdir=/usr/lib' '--sysconfdir=/etc' '--datadir=/usr/share' '--localstatedir=/var' '--mandir=/usr/man' '--infodir=/usr/info' '--disable-nls' 'BUILDCXX=g++' '--datadir=/usr/share/squid' '--libexecdir=/usr/lib/squid' '--sysconfdir=/etc/squid' '--enable-shared' '--disable-static' '--enable-delay-pools' '--enable-kill-parent-hack' '--enable-ssl' '--enable-cache-digests' '--enable-linux-netfilter' '--disable-unlinkd' '--enable-x-accelerator-vary' '--disable-translation' '--disable-auto-locale' '--with-dl' '--with-pthreads' '--enable-epoll' '--with-maxfd=2048' '--disable-ecap' '--disable-external-acl-helpers' '--disable-arch-native' '--with-krb5-config=no' '--without-mit-krb5' '--without-netfilter-conntrack' '--disable-ident-lookups' '--disable-auth-basic' '--disable-auth-digest' '--disable-auth-ntlm' '--disable-auth-negotiate' '--enable-dlmalloc' '--enable-ipv6' '--enable-ssl-crtd' '--without-gnutls' '--with-openssl=/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr' '--disable-icmp' '--disable-icap-client' '--disable-snmp' '--without-libcap' '--without-nettle' '--without-expat' '--without-libxml2' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=powerpc-openwrt-linux' 'target_alias=powerpc-openwrt-linux' 'CC=powerpc-openwrt-linux-musl-gcc' 'CFLAGS=-Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error ' 'LDFLAGS=-L/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/lib -L/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/lib -znow -zrelro -latomic ' 'CPPFLAGS=-I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include ' 'CXX=powerpc-openwrt-linux-musl-g++' 'CXXFLAGS=-Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error ' 'PKG_CONFIG=/builder/shared-workdir/build/sdk/staging_dir/host/bin/pkg-config' 'PKG_CONFIG_PATH=/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/lib/pkgconfig:/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/share/pkgconfig' 'PKG_CONFIG_LIBDIR=/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/lib/pkgconfig:/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/share/pkgconfig' --cache-file=../config.cache --srcdir=. configure: loading site script /builder/shared-workdir/build/sdk/include/site/powerpc configure: loading cache ../config.cache checking for a BSD-compatible install... (cached) /builder/shared-workdir/build/sdk/staging_dir/host/bin/install -c checking whether build environment is sane... yes checking for powerpc-openwrt-linux-strip... (cached) powerpc-openwrt-linux-musl-strip checking for a race-free mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) gawk checking whether make sets $(MAKE)... (cached) yes checking whether make supports nested variables... (cached) yes checking whether make supports nested variables... (cached) yes checking build system type... (cached) x86_64-pc-linux-gnu checking host system type... (cached) powerpc-openwrt-linux-gnu checking how to print strings... printf checking whether make supports the include directive... yes (GNU style) checking for powerpc-openwrt-linux-gcc... (cached) powerpc-openwrt-linux-musl-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... (cached) o checking whether the compiler supports GNU C... (cached) yes checking whether powerpc-openwrt-linux-musl-gcc accepts -g... (cached) yes checking for powerpc-openwrt-linux-musl-gcc option to enable C11 features... (cached) none needed checking whether powerpc-openwrt-linux-musl-gcc understands -c and -o together... (cached) yes checking dependency style of powerpc-openwrt-linux-musl-gcc... (cached) none checking for a sed that does not truncate output... (cached) /builder/shared-workdir/build/sdk/staging_dir/host/bin/sed checking for grep that handles long lines and -e... (cached) /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep checking for egrep... (cached) /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep -E checking for fgrep... (cached) /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep -F checking for ld used by powerpc-openwrt-linux-musl-gcc... (cached) powerpc-openwrt-linux-musl-ld checking if the linker (powerpc-openwrt-linux-musl-ld) is GNU ld... (cached) yes checking for BSD- or MS-compatible name lister (nm)... (cached) powerpc-openwrt-linux-musl-gcc-nm checking the name lister (powerpc-openwrt-linux-musl-gcc-nm) interface... (cached) BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... (cached) 1572864 checking how to convert x86_64-pc-linux-gnu file names to powerpc-openwrt-linux-gnu format... (cached) func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... (cached) func_convert_file_noop checking for powerpc-openwrt-linux-musl-ld option to reload object files... (cached) -r checking for powerpc-openwrt-linux-file... no checking for file... (cached) file configure: WARNING: using cross tools not prefixed with host triplet checking for powerpc-openwrt-linux-objdump... (cached) powerpc-openwrt-linux-musl-objdump checking how to recognize dependent libraries... (cached) pass_all checking for powerpc-openwrt-linux-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... (cached) printf %s\n checking for powerpc-openwrt-linux-ar... (cached) powerpc-openwrt-linux-musl-gcc-ar checking for archiver @FILE support... (cached) @ checking for powerpc-openwrt-linux-strip... (cached) powerpc-openwrt-linux-musl-strip checking for powerpc-openwrt-linux-ranlib... (cached) powerpc-openwrt-linux-musl-gcc-ranlib checking command to parse powerpc-openwrt-linux-musl-gcc-nm output from powerpc-openwrt-linux-musl-gcc object... (cached) ok checking for sysroot... no checking for a working dd... (cached) /bin/dd checking how to truncate binary pipes... (cached) /bin/dd bs=4096 count=1 checking for powerpc-openwrt-linux-mt... no checking for mt... no checking if : is a manifest tool... (cached) no checking for stdio.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for strings.h... (cached) yes checking for sys/stat.h... (cached) yes checking for sys/types.h... (cached) yes checking for unistd.h... (cached) yes checking for dlfcn.h... (cached) yes checking for objdir... (cached) .libs checking if powerpc-openwrt-linux-musl-gcc supports -fno-rtti -fno-exceptions... (cached) no checking for powerpc-openwrt-linux-musl-gcc option to produce PIC... (cached) -fPIC -DPIC checking if powerpc-openwrt-linux-musl-gcc PIC flag -fPIC -DPIC works... (cached) yes checking if powerpc-openwrt-linux-musl-gcc static flag -static works... (cached) yes checking if powerpc-openwrt-linux-musl-gcc supports -c -o file.o... (cached) yes checking if powerpc-openwrt-linux-musl-gcc supports -c -o file.o... (cached) yes checking whether the powerpc-openwrt-linux-musl-gcc linker (powerpc-openwrt-linux-musl-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... (cached) no checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for shl_load... (cached) no checking for shl_load in -ldld... (cached) no checking for dlopen... (cached) yes checking whether a program can dlopen itself... (cached) cross checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking what extension is used for runtime loadable modules... (cached) .so checking what variable specifies run-time module search path... (cached) LD_LIBRARY_PATH checking for the default library search path... (cached) /lib /usr/lib /usr/lib/x86_64-linux-gnu/libfakeroot /usr/local/lib /usr/local/lib/x86_64-linux-gnu /lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu /lib32 /usr/lib32 /libx32 /usr/libx32 checking for powerpc-openwrt-linux-musl-gcc options needed to detect all undeclared functions... (cached) none needed checking for library containing dlopen... (cached) none required checking for dlerror... (cached) yes checking for shl_load... (cached) no checking for shl_load in -ldld... (cached) no checking for dld_link in -ldld... (cached) no checking for _ prefix in compiled symbols... (cached) no checking whether deplibs are loaded by dlopen... (cached) yes checking for argz.h... (cached) no checking for error_t... (cached) no checking for argz_add... (cached) no checking for argz_append... (cached) no checking for argz_count... (cached) no checking for argz_create_sep... (cached) no checking for argz_insert... (cached) no checking for argz_next... (cached) no checking for argz_stringify... (cached) no checking whether libtool supports -dlopen/-dlpreopen... (cached) yes checking for unistd.h... (cached) yes checking for dl.h... (cached) no checking for sys/dl.h... (cached) no checking for dld.h... (cached) no checking for mach-o/dyld.h... (cached) no checking for dirent.h... (cached) yes checking for closedir... (cached) yes checking for opendir... (cached) yes checking for readdir... (cached) yes checking for strlcat... (cached) yes checking for strlcpy... (cached) yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands make[4]: Entering directory '/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7' Making all in compat make[5]: Entering directory '/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7/compat' /bin/bash ../libtool --tag=CC --mode=compile powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o GnuRegex.lo GnuRegex.c OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c GnuRegex.c -fPIC -DPIC -o .libs/GnuRegex.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o assert.lo assert.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c assert.cc -fPIC -DPIC -o .libs/assert.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o compat.lo compat.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c compat.cc -fPIC -DPIC -o .libs/compat.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o debug.lo debug.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c debug.cc -fPIC -DPIC -o .libs/debug.o /bin/bash ../libtool --tag=CC --mode=compile powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o eui64_aton.lo eui64_aton.c OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c eui64_aton.c -fPIC -DPIC -o .libs/eui64_aton.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o getaddrinfo.lo getaddrinfo.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c getaddrinfo.cc -fPIC -DPIC -o .libs/getaddrinfo.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o getnameinfo.lo getnameinfo.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c getnameinfo.cc -fPIC -DPIC -o .libs/getnameinfo.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o inet_ntop.lo inet_ntop.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c inet_ntop.cc -fPIC -DPIC -o .libs/inet_ntop.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o inet_pton.lo inet_pton.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c inet_pton.cc -fPIC -DPIC -o .libs/inet_pton.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o memrchr.lo memrchr.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c memrchr.cc -fPIC -DPIC -o .libs/memrchr.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o mswindows.lo mswindows.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c mswindows.cc -fPIC -DPIC -o .libs/mswindows.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o shm.lo shm.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c shm.cc -fPIC -DPIC -o .libs/shm.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o statvfs.lo statvfs.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c statvfs.cc -fPIC -DPIC -o .libs/statvfs.o /bin/bash ../libtool --tag=CC --mode=compile powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o strnrchr.lo strnrchr.c OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c strnrchr.c -fPIC -DPIC -o .libs/strnrchr.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o strnstr.lo strnstr.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c strnstr.cc -fPIC -DPIC -o .libs/strnstr.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o xalloc.lo xalloc.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c xalloc.cc -fPIC -DPIC -o .libs/xalloc.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o xstrerror.lo xstrerror.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c xstrerror.cc -fPIC -DPIC -o .libs/xstrerror.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o xstring.lo xstring.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c xstring.cc -fPIC -DPIC -o .libs/xstring.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o xstrto.lo xstrto.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c xstrto.cc -fPIC -DPIC -o .libs/xstrto.o /bin/bash ../libtool --tag=CXX --mode=link powerpc-openwrt-linux-musl-g++ -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -L/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/lib -L/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/lib -znow -zrelro -latomic -o libcompatsquid.la GnuRegex.lo assert.lo compat.lo debug.lo eui64_aton.lo getaddrinfo.lo getnameinfo.lo inet_ntop.lo inet_pton.lo memrchr.lo mswindows.lo shm.lo statvfs.lo strnrchr.lo strnstr.lo xalloc.lo xstrerror.lo xstring.lo xstrto.lo libtool: warning: library '/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/lib/libatomic.la' was moved. libtool: warning: library '/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/lib/libstdc++.la' was moved. OpenWrt-libtool: link: powerpc-openwrt-linux-musl-gcc-ar cr .libs/libcompatsquid.a .libs/GnuRegex.o .libs/assert.o .libs/compat.o .libs/debug.o .libs/eui64_aton.o .libs/getaddrinfo.o .libs/getnameinfo.o .libs/inet_ntop.o .libs/inet_pton.o .libs/memrchr.o .libs/mswindows.o .libs/shm.o .libs/statvfs.o .libs/strnrchr.o .libs/strnstr.o .libs/xalloc.o .libs/xstrerror.o .libs/xstring.o .libs/xstrto.o OpenWrt-libtool: link: powerpc-openwrt-linux-musl-gcc-ranlib .libs/libcompatsquid.a OpenWrt-libtool: link: ( cd ".libs" && rm -f "libcompatsquid.la" && ln -s "../libcompatsquid.la" "libcompatsquid.la" ) make[5]: Leaving directory '/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7/compat' Making all in lib make[5]: Entering directory '/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7/lib' make[6]: Entering directory '/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7/lib' /bin/bash ../libtool --tag=CC --mode=compile powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o base64.lo base64.c OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c base64.c -fPIC -DPIC -o .libs/base64.o /bin/bash ../libtool --tag=CC --mode=compile powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o html_quote.lo html_quote.c OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c html_quote.c -fPIC -DPIC -o .libs/html_quote.o /bin/bash ../libtool --tag=CC --mode=compile powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o md5.lo md5.c OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c md5.c -fPIC -DPIC -o .libs/md5.o /bin/bash ../libtool --tag=CC --mode=compile powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o rfc1738.lo rfc1738.c OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c rfc1738.c -fPIC -DPIC -o .libs/rfc1738.o /bin/bash ../libtool --tag=CC --mode=compile powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o rfc2617.lo rfc2617.c OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c rfc2617.c -fPIC -DPIC -o .libs/rfc2617.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o hash.lo hash.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c hash.cc -fPIC -DPIC -o .libs/hash.o /bin/bash ../libtool --tag=CXX --mode=compile powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o Splay.lo Splay.cc OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c Splay.cc -fPIC -DPIC -o .libs/Splay.o /bin/bash ../libtool --tag=CC --mode=compile powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o getfullhostname.lo getfullhostname.c OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c getfullhostname.c -fPIC -DPIC -o .libs/getfullhostname.o /bin/bash ../libtool --tag=CC --mode=compile powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o heap.lo heap.c OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c heap.c -fPIC -DPIC -o .libs/heap.o /bin/bash ../libtool --tag=CC --mode=compile powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o iso3307.lo iso3307.c OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c iso3307.c -fPIC -DPIC -o .libs/iso3307.o /bin/bash ../libtool --tag=CC --mode=compile powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o radix.lo radix.c OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c radix.c -fPIC -DPIC -o .libs/radix.o /bin/bash ../libtool --tag=CC --mode=compile powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o rfc1123.lo rfc1123.c OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c rfc1123.c -fPIC -DPIC -o .libs/rfc1123.o /bin/bash ../libtool --tag=CC --mode=compile powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o stub_memaccount.lo stub_memaccount.c OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c stub_memaccount.c -fPIC -DPIC -o .libs/stub_memaccount.o /bin/bash ../libtool --tag=CC --mode=compile powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o util.lo util.c OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c util.c -fPIC -DPIC -o .libs/util.o /bin/bash ../libtool --tag=CC --mode=compile powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c -o xusleep.lo xusleep.c OpenWrt-libtool: compile: powerpc-openwrt-linux-musl-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../lib -I../src -I../include -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/include -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -c xusleep.c -fPIC -DPIC -o .libs/xusleep.o /bin/bash ../libtool --tag=CC --mode=link powerpc-openwrt-linux-musl-gcc -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -L/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/lib -L/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/lib -znow -zrelro -latomic -o libmiscencoding.la base64.lo html_quote.lo md5.lo rfc1738.lo rfc2617.lo libtool: warning: library '/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/lib/libatomic.la' was moved. OpenWrt-libtool: link: powerpc-openwrt-linux-musl-gcc-ar cr .libs/libmiscencoding.a .libs/base64.o .libs/html_quote.o .libs/md5.o .libs/rfc1738.o .libs/rfc2617.o OpenWrt-libtool: link: powerpc-openwrt-linux-musl-gcc-ranlib .libs/libmiscencoding.a OpenWrt-libtool: link: ( cd ".libs" && rm -f "libmiscencoding.la" && ln -s "../libmiscencoding.la" "libmiscencoding.la" ) /bin/bash ../libtool --tag=CXX --mode=link powerpc-openwrt-linux-musl-g++ -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -L/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/lib -L/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/lib -znow -zrelro -latomic -o libmisccontainers.la hash.lo libtool: warning: library '/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/lib/libatomic.la' was moved. libtool: warning: library '/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/lib/libstdc++.la' was moved. OpenWrt-libtool: link: powerpc-openwrt-linux-musl-gcc-ar cr .libs/libmisccontainers.a .libs/hash.o OpenWrt-libtool: link: powerpc-openwrt-linux-musl-gcc-ranlib .libs/libmisccontainers.a OpenWrt-libtool: link: ( cd ".libs" && rm -f "libmisccontainers.la" && ln -s "../libmisccontainers.la" "libmisccontainers.la" ) /bin/bash ../libtool --tag=CXX --mode=link powerpc-openwrt-linux-musl-g++ -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Woverloaded-virtual -Werror -pipe -D_REENTRANT -I/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/include -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7=squid-5.7 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -Wno-error -L/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/usr/lib -L/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/lib -znow -zrelro -latomic -o libmiscutil.la Splay.lo getfullhostname.lo heap.lo iso3307.lo radix.lo rfc1123.lo stub_memaccount.lo util.lo xusleep.lo libtool: warning: library '/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/lib/libatomic.la' was moved. libtool: warning: library '/builder/shared-workdir/build/sdk/staging_dir/toolchain-powerpc_8548_gcc-12.2.0_musl/lib/libstdc++.la' was moved. OpenWrt-libtool: link: powerpc-openwrt-linux-musl-gcc-ar cr .libs/libmiscutil.a .libs/Splay.o .libs/getfullhostname.o .libs/heap.o .libs/iso3307.o .libs/radix.o .libs/rfc1123.o .libs/stub_memaccount.o .libs/util.o .libs/xusleep.o OpenWrt-libtool: link: powerpc-openwrt-linux-musl-gcc-ranlib .libs/libmiscutil.a OpenWrt-libtool: link: ( cd ".libs" && rm -f "libmiscutil.la" && ln -s "../libmiscutil.la" "libmiscutil.la" ) make[6]: Leaving directory '/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7/lib' make[5]: Leaving directory '/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7/lib' Making all in libltdl make[5]: Entering directory '/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7/libltdl' CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash '/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7/cfgaux/missing' aclocal-1.16 -I m4 cd . && /bin/bash /builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7/cfgaux/missing automake-1.16 --foreign CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash '/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7/cfgaux/missing' autoconf autom4te: error: /builder/shared-workdir/build/staging_dir/host/share/autoconf/autoconf/trailer.m4: no such file or directory make[5]: *** [Makefile:558: configure] Error 1 make[5]: Leaving directory '/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7/libltdl' make[4]: *** [Makefile:594: all-recursive] Error 1 make[4]: Leaving directory '/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7' make[3]: *** [Makefile:156: /builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/squid-5.7/.built] Error 2 time: package/feeds/packages/squid/compile#80.58#24.45#180.36