autoreconf: export WARNINGS=
autoreconf: Entering directory '.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: /builder/shared-workdir/build/sdk/staging_dir/host/bin/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/host/share/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/hostpkg/share/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/share/aclocal -I m4 -I . --force -I m4
autoreconf: configure.ac: tracing
autoreconf: running: /builder/shared-workdir/build/sdk/staging_dir/host/bin/libtoolize --install --force
OpenWrt-libtoolize: putting auxiliary files in '.'.
OpenWrt-libtoolize: linking file './config.guess'
OpenWrt-libtoolize: linking file './config.sub'
OpenWrt-libtoolize: linking file './install-sh'
OpenWrt-libtoolize: linking file './ltmain.sh'
OpenWrt-libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
OpenWrt-libtoolize: linking file 'm4/libtool.m4'
OpenWrt-libtoolize: You should add the contents of 'm4/libtool.m4' to 'aclocal.m4'.
OpenWrt-libtoolize: linking file 'm4/ltoptions.m4'
OpenWrt-libtoolize: You should add the contents of 'm4/ltoptions.m4' to 'aclocal.m4'.
OpenWrt-libtoolize: linking file 'm4/ltsugar.m4'
OpenWrt-libtoolize: You should add the contents of 'm4/ltsugar.m4' to 'aclocal.m4'.
OpenWrt-libtoolize: linking file 'm4/ltversion.m4'
OpenWrt-libtoolize: linking file 'm4/lt~obsolete.m4'
OpenWrt-libtoolize: You should add the contents of 'm4/lt~obsolete.m4' to 'aclocal.m4'.
OpenWrt-libtoolize: Remember to add 'LT_INIT' to configure.ac.
autoreconf: configure.ac: not using Intltool
autoreconf: configure.ac: not using Gtkdoc
autoreconf: running: /builder/shared-workdir/build/sdk/staging_dir/host/bin/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/host/share/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/hostpkg/share/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/share/aclocal -I m4 -I . --force -I m4
autoreconf: running: /builder/shared-workdir/build/sdk/staging_dir/host/bin/autoconf --include=/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/host/share/aclocal --include=/builder/shared-workdir/build/sdk/staging_dir/hostpkg/share/aclocal --include=/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/share/aclocal --include=m4 --include=. --prepend-include=/builder/shared-workdir/build/sdk/staging_dir/host/share/aclocal --force
autoreconf: running: /builder/shared-workdir/build/sdk/staging_dir/host/bin/autoheader --include=/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/host/share/aclocal --include=/builder/shared-workdir/build/sdk/staging_dir/hostpkg/share/aclocal --include=/builder/shared-workdir/build/sdk/staging_dir/target-powerpc_8548_musl/usr/share/aclocal --include=m4 --include=. --prepend-include=/builder/shared-workdir/build/sdk/staging_dir/host/share/aclocal --force
autoreconf: running: /builder/shared-workdir/build/sdk/staging_dir/host/bin/automake --add-missing --force-missing
configure.ac:123: installing './compile'
configure.ac:129: installing './missing'
docs/examples/Makefile.am: installing './depcomp'
autoreconf: Leaving directory '.'
configure: WARNING: unrecognized options: --disable-nls, --with-libidn, --without-axtls, --without-cyassl, --without-polarssl, --without-winssl
configure: loading site script /builder/shared-workdir/build/sdk/include/site/powerpc
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable ECH support... no
checking for path separator... :
checking for sed... /builder/shared-workdir/build/sdk/staging_dir/host/bin/sed
checking for grep... /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep
checking that grep -E works... yes
configure: using CFLAGS: -Os -pipe -mcpu=8548 -fno-caller-saves -fno-plt -fhonour-copts -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/libcurl-gnutls/curl-7.86.0=curl-7.86.0 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -DPIC -fPIC 
configure: CFLAGS note: CFLAGS should only be used to specify C compiler flags, not macro definitions. Use CPPFLAGS for: -D_FORTIFY_SOURCE=1
configure: CFLAGS note: CFLAGS should only be used to specify C compiler flags, not macro definitions. Use CPPFLAGS for: -DPIC
configure: WARNING: Continuing even with errors mentioned immediately above this line.
checking for a BSD-compatible install... /builder/shared-workdir/build/sdk/staging_dir/host/bin/install -c
checking for powerpc-openwrt-linux-gcc... powerpc-openwrt-linux-musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether powerpc-openwrt-linux-musl-gcc accepts -g... yes
checking for powerpc-openwrt-linux-musl-gcc option to enable C11 features... none needed
checking whether powerpc-openwrt-linux-musl-gcc understands -c and -o together... yes
checking how to run the C preprocessor... powerpc-openwrt-linux-musl-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /builder/shared-workdir/build/sdk/staging_dir/host/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for powerpc-openwrt-linux-strip... powerpc-openwrt-linux-musl-strip
checking for a race-free mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of powerpc-openwrt-linux-musl-gcc... none
checking curl version... 7.86.0
checking build system type... x86_64-pc-linux-gnu
checking host system type... powerpc-openwrt-linux-gnu
checking for grep that handles long lines and -e... (cached) /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep
checking for egrep... /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defined... no
checking if _THREAD_SAFE is actually needed... no
checking if _THREAD_SAFE is onwards defined... no
checking if _REENTRANT is already defined... no
checking if _REENTRANT is actually needed... no
checking if _REENTRANT is onwards defined... no
checking for powerpc-openwrt-linux-musl-gcc option to enable large file support... none needed
checking how to print strings... printf
checking for a sed that does not truncate output... (cached) /builder/shared-workdir/build/sdk/staging_dir/host/bin/sed
checking for fgrep... /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep -F
checking for ld used by powerpc-openwrt-linux-musl-gcc... powerpc-openwrt-linux-musl-ld
checking if the linker (powerpc-openwrt-linux-musl-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... powerpc-openwrt-linux-musl-gcc-nm
checking the name lister (powerpc-openwrt-linux-musl-gcc-nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to powerpc-openwrt-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for powerpc-openwrt-linux-musl-ld option to reload object files... -r
checking for powerpc-openwrt-linux-file... no
checking for file... file
configure: WARNING: using cross tools not prefixed with host triplet
checking for powerpc-openwrt-linux-objdump... powerpc-openwrt-linux-musl-objdump
checking how to recognize dependent libraries... pass_all
checking for powerpc-openwrt-linux-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for powerpc-openwrt-linux-ar... powerpc-openwrt-linux-musl-gcc-ar
checking for archiver @FILE support... @
checking for powerpc-openwrt-linux-strip... (cached) powerpc-openwrt-linux-musl-strip
checking for powerpc-openwrt-linux-ranlib... powerpc-openwrt-linux-musl-gcc-ranlib
checking command to parse powerpc-openwrt-linux-musl-gcc-nm output from powerpc-openwrt-linux-musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for powerpc-openwrt-linux-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if powerpc-openwrt-linux-musl-gcc supports -fno-rtti -fno-exceptions... no
checking for powerpc-openwrt-linux-musl-gcc option to produce PIC... -fPIC -DPIC
checking if powerpc-openwrt-linux-musl-gcc PIC flag -fPIC -DPIC works... yes
checking if powerpc-openwrt-linux-musl-gcc static flag -static works... yes
checking if powerpc-openwrt-linux-musl-gcc supports -c -o file.o... yes
checking if powerpc-openwrt-linux-musl-gcc supports -c -o file.o... (cached) yes
checking whether the powerpc-openwrt-linux-musl-gcc linker (powerpc-openwrt-linux-musl-ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether to build shared libraries with -version-info... yes
checking whether to build shared libraries with -no-undefined... no
checking whether to build shared libraries with -mimpure-text... no
checking whether to build shared libraries with PIC... yes
checking whether to build static libraries with PIC... no
checking whether to build shared libraries only... no
checking whether to build static libraries only... no
checking for powerpc-openwrt-linux-windres... no
checking for windres... no
checking for inline... inline
checking if cpp -P is needed... yes
checking if cpp -P works... yes
checking if compiler is DEC/Compaq/HP C... no
checking if compiler is HP-UX C... no
checking if compiler is IBM C... no
checking if compiler is Intel C... no
checking if compiler is clang... no
checking if compiler is GNU C... yes
checking if compiler is LCC... no
checking if compiler is SGI MIPSpro C... no
checking if compiler is SGI MIPS C... no
checking if compiler is SunPro C... no
checking if compiler is Tiny C... no
checking if compiler accepts some basic options... yes
configure: compiler options added: -Werror-implicit-function-declaration 
checking if compiler optimizer assumed setting might be used... no
checking if compiler accepts strict warning options... yes
configure: compiler options added: -Wno-system-headers 
checking if compiler halts on compilation errors... yes
checking if compiler halts on negative sized arrays... yes
checking if compiler halts on function prototype mismatch... yes
checking if compiler supports hiding library internal symbols... yes
checking for windows.h... no
checking whether build target is a native Windows one... no
checking whether build target supports WIN32 file API... no
checking whether build target supports WIN32 crypto API... no
checking for good-to-use Darwin CFLAGS... no
checking whether to link macOS CoreFoundation and SystemConfiguration framework... no
checking to see if the compiler supports __builtin_available()... no
checking whether to support http... yes
checking whether to support ftp... no
checking whether to support file... no
checking whether to support ldap... no
checking whether to support ldaps... no
checking whether to support rtsp... no
checking whether to support proxies... yes
checking whether to support dict... no
checking whether to support telnet... no
checking whether to support tftp... no
checking whether to support pop3... no
checking whether to support imap... no
checking whether to support smb... no
checking whether to support smtp... no
checking whether to support gopher... no
checking whether to support mqtt... no
checking whether to provide built-in manual... no
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking for windows.h... (cached) no
checking for winsock2.h... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking for zlib.h... yes
checking for gzread in -lz... yes
configure: found both libz and libz.h header
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... no
configure: WARNING: the previous check could not be made default was used
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Secure Transport... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for gnutls_x509_crt_get_dn2 in -lgnutls... no
configure: error: TLS not detected, you will not be able to use HTTPS, FTPS, NTLM and more.
Use --with-openssl, --with-gnutls, --with-wolfssl, --with-mbedtls, --with-nss, --with-schannel, --with-secure-transport, --with-amissl, --with-bearssl or --with-rustls to address this.
make[3]: *** [Makefile:116: /builder/shared-workdir/build/sdk/build_dir/target-powerpc_8548_musl/libcurl-gnutls/curl-7.86.0/.configured_68b329da9893e34099c7d8ad5cb9c940] Error 1
time: package/feeds/packages/libcurl-gnutls/compile#200.39#6.05#229.48